I have been completely obsessed with embroidery lately, and have been trying out different stitches. Of course, the first thing I wanted to try is to embroider onto crochet fabric, which gave me an excuse to play with Scheepjes Catona. The cotton yarn is now available in the cutest 10g balls in a huge range of colours and at 55p each, who could blame me! I decided to create something festive and the result are these charming Christmas baubles.
They are pretty quick to make, it takes me around 1.5 hours
to completely finish one, so still time to make few beforeChristmas.Hope you enjoy making them as much as I have.
Scheepjes Catona – 100% Mercerised Cotton – 10g –25m/27yrdColours used: 130 Old Lace, 173 Bluebell, 192 Scarlet, 205 Kiwi, 241 Parrot Green, 251 Garden Rose, 391 Deep Ocean Green, 411 Sweet Orange, 513 Apple Green, 514 Jade, 518 Marshmallow.3.00mm crochet hookLockable stitch markerTapestry needleToy stuffingPencil or tailor’s chalk (optional)
The completed bauble measures approximately 9cm (3.5”) in
height and 14cm (5.5”) in circumference around the biggest
Ch – chain Dc (US sc) – double crochet (US single crochet)Dc2tog (US sc2tog) – double crochet two stitches together (US single crochet two stitches together) Ss – slip stitch St(s) – stitch(es) Rd(s) – round(s) Rep – repeat Magic Loop – You will find tutorial on how to make Magic Loop on my website: http://moochka.co.uk/pages/support
Pattern note – Please note that pattern is written using UK terminology with US conversion given in abbreviation list.
Using chosen colour make a Magic Loop.
Rd 1: ch 1, 8 dc into Magic Loop, pull tight on the tail to close up opening, ss to first dc.
From now on you will work in continuous spiral, which means you will not ch 1 at the beginning of round and slip stitch to close round. Placing a marker on the first stitch of round is vital to denote the beginning of round. Move the marker up on every row.
Rd 2: * 2 dc into next st, 1 dc into next st, rep from * to end. (12 dc)
Rd 3: 1 dc into every st to end.
Rds 4 & 5: as rds 2 & 3. (18 dc)
Rd 6: * 2 dc into next st, 1 dc into each of next 2 sts, rep from * to end. (24 dc)
Rds 7 to 10: 1 dc into every st to end.
Rd 11: * 2 dc into next st, 1 dc into each of next 3 sts, rep from * to end. (30 dc)
Rds 12 to 16: 1 dc into every st to end.
Rd 17: * dc2tog, 1 dc into each of next 2 sts, rep from * to last 2 sts, dc2tog. (22 dc)
Begin stuffing the bauble.
Rd 18: * dc2tog, 1 dc into next st, rep from * to last st, 1 dc into last st. (15 dc)
Rd 19: * dc2tog, 1 dc into next st, rep from * to end. (10 dc)
Change to contrasting colour.
Rds 20 to 23: 1 dc into every st to end.
Insert more toy stuffing into top of bauble.
Rd 24: *dc2tog, rep from * to end. (5 dc)
Cut yarn leaving 10cm (4’’) long length for weaving in.
Following the picture tutorial below, work as follows:
1 & 2: Using tapestry needle, weave in yarn around the opening, I have used contrasting colour so you can see
3: Pull tight on the yarn to close up the opening.
4, 5 & 6: Hide the tail of your yarn in the top of bauble by
inserting your needle downwards through the top of bauble,
then back again the same way you took your needle out, to
trap the yarn. Cut off excess tail.
I have used only three types of stitches on the baubles: a
combination of back and straight stitch, running stitch and
chain stitch. I’m not an expert in embroidery (not even close!)
I just try out things and see what the finished product is like. I
think embroidery gives you lot of freedom as you really don’t
have to follow the rules, no need for structure, try it, if you
don’t like, then undo. The wonderful result of embroidering
onto crochet is that the finished result looks rather clumsy (in
a good way), which to me means handmade.
Crochet fabric does not produce perfectly straight lines so
working embroidery onto it gives you the perfectly rustic
Below is little tutorial on how I worked some of the stitches.
These are just guide lines that worked for me, if you find a
way of working them better, then that’s fantastic. This is the
first time I have tried to explain how to work embroidery
stitches, I hope my instructions will be clear.
Please check out thespruce.com website, I have found it very
helpful for explanation on how to make some of the stitches.
For the snowflake bauble, I have drawn a template, then
traced it onto the side of the bauble using tailor’s chalk as it
dusts off easily. If you do not have a tailor’s chalk use a
pencil or just try embroidering free hand.
For the snowflake, I have used a combination of back and
1 & 2: Thread your yarn through a tapestry needle and inset
it from the back to front, where the centre of the snowflake will be.
3 & 4: The long spikes of the snowflake stretches over 4 rows and the short ones over 2. The long ones are made using back stitch and the short ones using straight stitch. Insert your needle two rows above the centre and out again 2 rows above that. Pull the yarn through, being careful not to pull all of it out.
5 & 6: Insert the needle back into the same place as the end of first half of the spike (this creates the long spike of the snowflake) and at the same time pull the tip up 2 stitches to the left (this will create the short spikes).
7: Insert the needle back into the centre (short spike made) and pull the tip up through 2 stitches to the left (this is the first half of second long spike).
8 & 9: Insert the needle back into the centre and pull the tip up 4 stitches to the left, in the same line as the first half of the long spike.
10 & 11: Insert the needle back into the same place as the end of first half of the spike and at the same time pull the tip up 2 rows below (this will create the short spikes).
Continue repeating steps 8 to 11 until the full snowflake is made.
Embroider the little branches of the spikes using the straight
stitch, just going 1 stitch to each side of the spikes.
The dots above the short spikes are made using the running
stitch (see below for instructions)
When you finish the star, hide the yarn by feeding it through
the bauble twice, so it gets trapped in the stuffing, cut the
I have used this stitch at the bottom, around the decrease
part and the tops of the snowflake bauble.
Starting at the back
1 & 2: Insert the needle in and bring the tip up 1 stitch apart.
Pull yarn through.
3 & 4: Repeat the last steps with 1 stitch apart all around the
Feed the yarn through the bauble to trap it.
I used this stitch on the firework bauble. It looks beautiful
when done in different colours.
I have worked this stitch over one double crochet stitch going
up, down and sideways.
1: Bring the needle up through back to front. This is your
2: Insert the needle again at the starting point and bring the
tip up 1 stitch away.
3: Place the yarn behind the needle and pull the needle through the loop.
4: Insert the needle back into the same stitch you just came
out from, but making sure the loop is secured in-between the
two strands of yarn. This will trap it and you can move on to
the next chain stitch.
This stitch was used to create the stars and crosses on the
top of the firework and star baubles.
The stars are worked as described in the snowflake but all
the spikes are made with single thread and over one or two
stitches. The crosses on tops of the baubles are made the
Starting from the back and around 2 rows up from colour
1: Insert the needle in and bring the tip up 2 stitches apart.
Pull yarn through.
2 & 3: Insert the needle from top, 2 rows up and 2 stitches
apart, going downwards, bring the tip up 2 rows below, this
should be in line with the starting point. Pull yarn through.
This is the first leg of the cross.
4 & 5: insert the needle in the same place as starting point,
pull the tip up through the same point as end of last step. Pull
yarn through. The second leg of cross made.
6 & 7: Insert the needle, 2 rows down and 2 stitches apart,
going upwards, bring the tip up 2 rows above, this should be
in line with the end of last step. Pull yarn through. This is the
first leg of second cross.
8 & 9: Insert the needle in the bottom corner of previous
cross, pull the tip up through the starting point of last step.
Pull yarn through. Second cross completed.
Continue repeating steps 2 to 9, working around the bauble.
Feed the yarn through the bauble to trap it.
I would like to take this opportunity to wish you all a very Merry Christmas
One last thing; Please excuse the rather wonky wreath, it’s the first time I actually properly shaped one (apart from the ones for the wedding, but they were in ivy, far easier). Quite a good fun though, and costs nothing, I used branches from my garden and local park.